Mahlkonig K30 TWIN Operations Instructions download pdf (Page 7)

4.3 Electrical Installation

Prior to plugging in observe the following safety instructions:

Protect your device with separate pre-fuses (not

included in the scope of delivery) according to

the information provided under point 2 „Techni-

cal Data“

Make sure that the pre-fuse is not overloaded

by other devices (e.g. fan heaters, deep freezers,

etc)

Check whether the main voltage and frequency

correspond to the information on the rating

plate underneath the grinder.

Insert the plug into the corresponding grounded outlet.

4.4 Adjustment of the portaﬁ lter rests

The grinder is designed so that all different portaﬁ lters from vari-

ous espresso machines ﬁ t into the rest for hands-free grinding op-

eration.

4.4.1 Keep the grinder switched off. Slightly loosen the allen screws

(pos. 13) with the included allen screw driver size 3mm and pull

down the portaﬁ lter rest (pos. 12).

4.4.2 Push the portaﬁ lter of your espresso machine onto the start/

stop switch between the portaﬁ lter mounting (pos. 11) and the rest

(pos 12). Now push up the portaﬁ lter rest until the portaﬁ lter holds

on its own. Now refasten the screws.

4. Set-up and Initial Adjustments

You have received your grinder in operating condition. Now you only

need to place it in a safe place and connect it to the main power

socket. Proceed as follows:

4.1 Place of Installation

Place the grinder on a level, vibration-free surface.

Never operate the grinder in moist, or even

worse, in wet surroundings!

4.2 Locking in the hoppers

Set the hopper into the bayonet socket. Grab the hopper with both

hands and turn it carefully in clockwise direction, until the bayonet

locks in.

Always loosen the grind adjustment brakes and

turn both adjustments to ﬁ ne (setting 0) when

locking in the hoppers. Turning the grind adjust-

ment ring repeatedly without loosening the

brake could damage the interlock.

Fasten the lock screw for the hopper (pos. 2) to prevent the hoppers

from unauthorized removal.

HORECA GASTRO GRINDER

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Comments to this Manuals

No comments

Mahlkonig K30 TWIN Operations Instructions Page 7

Comments to this Manuals

Related products and manuals for Straight grinders Mahlkonig K30 TWIN