Mahlkonig K30 TWIN Operations Instructions download pdf (Page 9)

5.2.7 Now brew a test portion of espresso using your machine. If the

result is unsatisfactory, alter the adjustment again by varying the

grinding time and grinding ﬁ neness until the best coffee results

have been achieved.

5.3 Interruption of grinding (break-function)

If the grinding process is interrupted before the set grinding time

has expired, the LED in the active pre-selection button ﬂ ashes. The

grinding process can be re-started by pushing the portaﬁ lter back

into the mounting. The missing quantity is ground. If this is not

desired push the pre-selection button and the entire set grinding

quantity or grinding time is available once again.

5.4 Software Menu

The following overview shows the handling of the K30 TWIN’s soft-

ware.

HORECA GASTRO GRINDER

Test runs have proved grind adjustments 1 – 4

to be the most common settings for espresso

depending on the origin, roast and blend. This

should be taken into account when adjusting

the grinder for the ﬁ rst time.

5.2.4 For the ﬁ rst test run the grinding time settings are pre-pro-

grammed for single shots to 2.0 sec and for double shots 4.0 sec.

For changing these settings please see chapter 5.3.

5.2.5 Choose the single or double pre-select-button according to

your portaﬁ lter. The LED shows which button is selected.

Single espresso left grinder Single espresso right grinder

Double espresso left grinder Double espresso right grinder

5.2.6 Push your espresso machine’s portaﬁ lter into the partaﬁ lter

mounting (pos. 11/12) so that the grinding process starts.

The ﬁ rst operation will not result in the desired

amount of espresso because the grinder has

to ﬁ ll up with ground coffee. The second shot

should give the correct result.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

No comments

Mahlkonig K30 TWIN Operations Instructions Page 9