Mahlkonig K30 TWIN Operations Instructions download pdf (Page 21)

The user has no inﬂ uence whatsoever on this

circuit breaker. If the circuit breaker trips re-

peatedly an authorised service partner must be

consulted as the motor‘s winding may be dam-

aged.

Motor protector

A thermo switch is built into the motor’s winding to block the mo-

tor in case of overheating. The display shows an alarm signal. Let

the motor cool down for approx. 30 minutes. The switch will con-

nect automatically when the winding is functional again.

Magnetic switch in the grinder’s lid

The lid of the grinder is secured with a magnetical switch. The

grinder only operates with the lid closed. In case the grinder cover

is opened with the main switch ON there will be an alarm signal

in the display (chapter 8.3). Only closing the cover and pressing the

PROG-button will clear the alarm.

8.2 Operating Fault

Defect

The grinder hums

but does not

grind.

The grinder does

not grind, the dis-

play is lit, single

cup is pre-select-

ed.

Cause

The spout is

clogged.

Grinding is set too

ﬁ ne.

A foreign object

is in the grinding

mechanism.

The grinding time

is set to 0.

Remedy

Set grinding ﬁ neness to

„coarse“ and trigger the

grinding process. The grind-

er will then grind itself free.

Afterwards, return the set-

ting to the desired grinding

ﬁ neness.

Turn the grinding ﬁ ne-

ness setting to the right,

to „coarse“, and trigger the

grinding process. The grind-

er will then grind itself free.

Afterwards, return the set-

ting to the desired grinding

ﬁ neness.

Clean the grinding mecha-

nism as described and re-

move the foreign object.

Observe the safety instruc-

tions!

Reset the grinding time.

HORECA GASTRO GRINDER

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Mahlkonig K30 TWIN Operations Instructions Page 21

Comments to this Manuals

Related products and manuals for Straight grinders Mahlkonig K30 TWIN