Mahlkonig Pro M espresso Operations Instructions download pdf (Page 23)

HORECA GRINDER

6. Insert the port-a-ﬁ lter holder as shown

past the Start/Stop button (pos. 5) and

hold it in this position.

7. Slide the holder in at the position (pos. 12)

until it engages.

8. Insert the port-a-ﬁ lter as a reference. If the

port-a-ﬁ lter does not stay in the desired

position, the holder must be readjusted.

9. Fasten the Allen screw below the

portaﬁ lter rest to ﬁ x it at the front panel fo

the grinder.

OPERATION

SETTING THE GRIND SIZE

Risk of damage resulting from

improper use!

• Adjust the grind size only when the grinder

is in operation or when there are no beans in

the grinder.

Set the degree of ﬁ neness using the button

(pos. 3). Push in the button and turn it to the

desired setting. Letting go locks the button into

position.

clockwise = ﬁ ner

anti-clockwise = coarser

Advise for grinding espresso: The manufacturer

suggests grind setting 2 for a ﬁ rst try. This

grind size should be in the range for espresso

extraction. (However this may heavily vary for

different coffees.)

DISPLAY NAVIGATION

The software menu is guided through the touch

buttons left and right of the display. The symbol

in the bottom corners of the display shows the

function of the respective touch button:

back / exit

enter / save

delete

The red line with the red triangle in the bottom

of the displays show that the slider is active and

that ﬁ gures can be changed.

DANGER

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

No comments

Mahlkonig Pro M espresso Operations Instructions Page 23