Mahlkonig K30 TWIN Operations Instructions download pdf (Page 11)

NEW

6.4.1 Adjust the grinding time (dosing)

• Simultaneously press and hold both buttons (pos. 8+10) for

appr. 3 seconds. The display reads MENU.

• Let go the buttons, the display reads STI (single time). Use the

left potentiometer (pos. 9) to adjust the grinding time for a sin-

gle espresso (rule of thumb 1,5 – 2,7 seconds).

• Scroll down with the single pre-selection button (pos.8) to DTI

(double time). Use the right potentiometer (pos. 11) to adjust

the grinding time for a double espresso (rule of thumb 2,5 – 4,5

sec).

• After the adjustment of any setting press and hold both but-

tons again to save the changes. The display reads SAVE.

6.4.2 Shot counters (daily counter and overall counter)

• Enter the menu by pushing and holding both buttons for appr.

3 seconds.

• Scroll through the menu with the single pre-selection button

(pos. 8) until the display reads S. The ﬁgure shows the number

of single shots that were ground since the last reset.

• Scroll down with the single button to the display reading D. The

ﬁgure shows the number down double shots that were ground

since the last reset.

GASTRONOMIEMÜHLEN

HORECA GRINDER

• Scroll down with the single button to the display reading SC.

The ﬁgure shows the total number of single shots that were

ground on this grinder. (not resettable)

• Scroll down with the single button to the display reading DC.

The ﬁgure shows the total number of double shots that were

ground on this grinder. (not resettable)

• For exiting the menu press and hold both buttons for appr. 3

seconds.

• Resetting the daily counter: Switch off the grinder (pos. 19).

Press and hold both buttons and switch back on the grinder.

Hold both buttons until the display reads RESET. The daily

counters are set back to Zero.

6.4.3 Cleaning counter

Irrespective to the shot counters described above a cleaning

counter is running in the background. After the ﬁxed amount

of 5,000 single shots the display will show CLEAN interchanging

with the standard screen (S 2,0 resp. D 4,0).

The grinder can still be used but it should be

cleaned regularly (see chapter 8).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

Mahlkonig K30 TWIN Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for Straight grinders Mahlkonig K30 TWIN